Hand Building with Molds

I have been busy with work, but in my studio I'm creating new molds for new work, along with creating new sculptures.  I had a bunch of stoneware clay, so I thought I would create some sculptures with it.  The images posted are of some things happening in my studio.  Enjoy.

I will update the progress of this work as it is created.  Pictured are five different pieces being worked on at the same time.

Raku Test Tiles/Cell Phones-Update

Well I have been working on refining the placement of my phones in the kiln I'm using, as stated in an earlier post.  As that work continues... I'm still working on my cup, vessel,  and a plate I threw earlier.  So, as those pieces are going through the drying stages, I'm getting ready to hopefully put them in a bisque firing this weekend.  Here are some images of those tests I did.  I didn't sieve the glaze I made up, so I'm assuming the glaze could look smoother without the larger particles in the glaze.  I've also made up a white raku crackle glaze, but I'll have to take a picture of those phones and post them in my next post.  Enjoy.

                                                              This glaze test was applied with a single thin coat over a black slip.
The more "copper colored area",  is a result of a thicker application.

This glaze test was applied with two
 "normal coats" of the glaze over a black slip. 

Here I applied two normal coats over black slip,
notice the larger glaze particles within the glaze.

Here is another test, this phone also has two
coats of glaze.  Notice that each of these phones
pictured have been placed in different areas of the kiln
and how it affects the glaze (heat differences).

This phone also has two coats,
as stated in the other tests.  With these tests
I tried to keep the application process the same.
The tests are also about location(placement) in the kiln.

This phone has the glaze applied the same as the others.

Here are the glaze tests all together,
as well as some phones that are without any glaze.

Cordless Drill Batteries

Here is an image of the cordless drill batteries I have slip cast.  I created the prototype, from images I took of a real battery charger, and then created a five piece mold to use for slip casting.  I didn't want to ruin the battery, so that's why I took pictures and then made the prototype.
I created a porcelain slip-cast clay body and then went to work.  The chargers took a while longer because I was only using one mold to create the form.  I didn't mind though, since I was working on other work as well.  Here is an image of the slip cast battery chargers on my shelf.  I've done an initial bisque firing and will fire them to cone 10.