America's ClayFest IV (April 14-May 21, 2016)

I found out recently that I will have a piece of work exhibited in the upcoming exhibition "America's ClayFest IV-Open Division".  The exhibit was juried by Sergei Isupov, ceramic artist, and Leslie Ferrin, of Ferrin Contemporary.  The exhibit will run from April 14-May 21, 2016, at Blue Line Arts Gallery in Roseville, California.

Pictured below is "Ingenuity", the piece that was chosen to be exhibited.  The piece was hand built using Terra Cotta (slabs, coil, and pinch pot method).  Glazes were applied and the piece was fired multiple times to achieve the desired surfaces.  Enjoy!

For more information: www.americasclayfest.org

New Wall Piece Underway-2016

I usually am working on multiple pieces at a time and thought I would post a picture of another piece that I am currently working on.  I have played with creating a press mold and a slip cast mold for the tile design, but thought I would use the press mold to use with hand building.  I am using terra cotta and have been piecing together the tiles onto a  1/2" inch slab.  The wet diameter of the design is 11 3/4".

I will go back and clean up and fill-in any joints and areas which will need attention and possibly make a slip cast mold from the finished prototype.  I'm still not sure about the gears as they are, and may change that portion of the design…I'm just not sure yet.  I am thinking of creating anywhere from nine to twelve, maybe more, to create a wall piece.

I haven't decided on the surface treatment just yet, and will be exploring glazes through tests that I will be doing shortly.  I know it is only one picture of the design in its early stages, but I thought it would give an idea to the time behind the process.  Enjoy.

New Work Underway-2016

During the school break I have been able to get back into the studio and get some new work underway.
I am still working on creating some new molds for slip casting and have also been hand building some new work as well.

Pictured below is one of the new pieces that I am currently working on.  I have bisque fired the piece and will post that image soon, before I start the glazing process.  Enjoy.

New Work, "Ingenuity", 2015

My time is usually spent working on sculptural pieces, but for last four months it seems all I have been working on most of the time is wheel thrown work.  I finally took time away from the wheel to get back to my first love…sculpture!

This piece, "Ingenuity", is a sculpture that I had been working on for a short time.  It took me seventeen hours to create this piece, minus the multiple firings I put it through and the build up of multiple glazes. The piece is hand built with press mold additions, and is made from earthenware clay.  It is hollow and was built "life size".

With my exploration into the "object/artifact", I came upon an old 1921 gasoline welder, that my dad had found up in his attic above the garage.  I instantly fell in love with the piece and found it to be perfect to try and create with clay.  I used slabs, coil, and the pinch pot method to create this piece.

The piece was fired to cone 05 bisque and then I used glazes that I created in graduate school, at Edinboro University of Pennsylvania.  I hadn't had an opportunity to use the glazes, beyond test tiles, and was happy to finally find a piece that I thought the glazes would compliment.

The glazes are low fire as well, cone 06, and really help to make the piece look like the real thing, only with more rust and decay.

Pictured below are pictures of the piece in different stages of the making process.  Enjoy.

Slip Casting with a new mold

Pictured below are images of slip casting underway.  I created two press molds and then created two slip cast molds of the designed tile work.  I also made the thickness of the tiles thicker to create a more visually interesting design when placed on the wall.

I will post more images of this work as it comes along.  Unfortunately the first tile is sticking in an area of the mold that I will have to clean up a bit more, for easier removal of the cast tile.

Finished Wall Piece-"Mechanical Repetition, 2015"

I finished my new ceramic wall piece and titled it "Mechanical Repetition".  It is made of Terra Cotta and a cone 6 black bronze glaze.  This piece took awhile to make due to the number of pieces I had to make and fit together.  Pictured below is the piece hanging on the wall.

Ceramic Tile (Wall Piece)

I have been revisiting ceramic tile and design with this new piece.  I forgot how fun it is…and time consuming to put a piece like this together, but I really enjoyed the time spent on this piece.  The work is of a new design and I used two different molds that I created to make this piece work.  I used Terra Cotta and hand pressed all the pieces.  I then used my black bronze glaze and fired the work to cone 6, after I did an initial bisque firing first.  The work was then applied to a piece of plywood.  I dry fitted together the pieces after the glaze firing, so I could trace out the exterior of the form and then cut the wood using a table saw and a hand held jigsaw to mimic the edges of the tiles to be placed.

The piece measures 30" x 38" x 1 1/2", and is held to the wall using french cleats, which I made as well.  All the wood was sanded by hand and then I painted the edges and the cleats, using a black satin latex paint.

The piece is currently on display, so I don't have a final picture to show the work, so I will try to get a final photo after the show comes down.

Enjoy!

Hand Building with Molds

I have been busy with work, but in my studio I'm creating new molds for new work, along with creating new sculptures.  I had a bunch of stoneware clay, so I thought I would create some sculptures with it.  The images posted are of some things happening in my studio.  Enjoy.

I will update the progress of this work as it is created.  Pictured are five different pieces being worked on at the same time.

New Work-"It's Complicated"

I finally finished up a piece that I have been working on for some time.  The piece is hand built using slabs and molds and was fired to cone six in an electric kiln.  This piece came to mind when I was thinking about industry and the role in history in which industry has had, when it comes to the creation of weapons used for offensive and defensive purposes.  Ironically the year I was working on it (2014-2015), new turmoil arose not only in the Middle East, but also in the annexation of Crimea.

The creation of weapons is closely tied to industry and technology and sometimes used in situations in which the technology was not intended for.  This idea was the basis of creating this piece, and although it is not new to us, it does deserve a moment of contemplation on the time we live in and how history seems to repeat itself.

Below is a picture of the new work titled, "It's Complicated".

America's Clay Fest III (April 17-May 30, 2015)

I recently found out that I had a piece accepted into "America's Clay Fest III".  Formerly known as "Feats of Clay", the exhibition is an international juried ceramic exhibit.  The Jurors for the exhibition are Tip Toland, ceramic sculptor, and Peter Held, Chief Curator at the Ceramic Research Center at Arizona State University.  The exhibit will take place at Blue Line Arts Gallery in Roseville, California.

For more information check out these websites:  www.americasclayfest.org and bluelinearts.org, for more information.

Pictured below is the piece "Possibilities", which will be in the exhibit.

teapots! 9th Invitational at Morgan Contemporary Glass Gallery

I was invited to be a part of a teapot exhibition at the Morgan Contemporary Glass Gallery in Pittsburgh, Pennsylvania.  The exhibit runs from April 10-June 13, 2015.
I was honored to be asked to participate in the exhibit and those who know me, know I don't usually create pottery, or much functional work.  So, I had to sit down and create a teapot for the show.

It took me some time to figure out what type of form and then how the surface would later be developed.  I wanted it to be functional, although that was not necessary.

If you are in the area (Pittsburgh), you should stop by the Gallery to check out the show.  Here is the website for the gallery:  Morgan Glass Gallery

Below are some images of the teapot that I sent to the gallery.

SouthWorks 2015, 20th National Juried Exhibition

I had a piece recently accepted into the SouthWorks 2015 exhibition.  The show was juried by Will South (Chief Curator for the Columbia Museum of Art, Columbia, South Carolina and Chief Curator at the Dayton Art Institute, Dayton, Ohio).  The exhibition takes place April 10-May 8, with the opening on April 10 from 6-9PM at the Oconee Cultural Arts Foundation, in Watkinsville, Georgia.

There were 425 entries for which Mr. South had to choose from, for the exhibit.
Pictured below is the piece selected, "Fossil Fuel".

For more information about the exhibition:  www.ocaf.com